Contact Us
All Ozone Generators Professional Ozone Generators Ozone Water Injection Systems Electrolytic Ozone Generators Industrial Ozone Generators Commercial Ozone Generators Ozone System Equipment
All Applications Water Treatment Bottled Water & Beverage Wastewater Treatment Agriculture Aquaculture Colour & COD Reduction Cooling Towers Swimming Pools Food Safety Fresh Produce Hygiene Polytunnel Mould Control Cold Room Solutions Ethylene & Pathogen Control Process Water Hygiene Meat, Poultry & Seafood Air & Emissions Control Industrial Odour Control Flue Gas, NOx & VOC Control Need guidance? Ozone Suitability Check Ozone Calculators
Services
Case Studies Blog Ozone Library Technical Glossary Ozone Calculators Ozone Suitability Check
Who We Are
Contact Us
Home / Products / Ozone Generators / Commercial Ozone Generators

GM1-E Commercial Ozone Generator

Compact commercial ozone generator for oxygen-fed operation, designed for refrigerated rooms, cold rooms and handling areas where a small modular ozone source is required for odour control and disinfection support.

  • 2 g/h ozone output on oxygen
  • Compact oxygen-fed modular unit
  • Manual power and flow control
  • Suitable for centralised multi-generator layouts
Request a Quote
GM1-E Commercial Ozone Generator

Technical Summary

System
Generator model
GM1-E
System configuration
Commercial standalone ozone generator for bottled oxygen or PSA-fed operation
Generation technology
Air-cooled 2 g O₃/h module with borosilicate dielectric
Control system
Manual ON and GENERATE switches, with manual ozone power control by potentiometer
Indicators and sensors
Power indicator light, ozone amp consumption indicator, ozone amperage and oxygen pressure monitoring
Performance
Ozone production
2 g O₃/h on oxygen, 1 g O₃/h on dry air
Ozone concentration
3 g O₃/Nm³ on oxygen, 1.8 g O₃/Nm³ on dry air
Gas flow
6 L/min on oxygen, 20 L/min on dry air
Gas connection IN/OUT
Tube 8 mm outside diameter
Flow regulation
Oxygen flowmeter with manual regulation
Utilities
Power supply
230 V, 50–60 Hz
Electric power
50 W
Compressed gas unit
Pressure regulator, oxygen inlet solenoid valve, ozone outlet solenoid valve and oxygen flowmeter
Source gas
Oxygen supply from cylinder or PSA
Installation
Ready to plug and play
Operating conditions
Room fittings
Install in a clean and dry space, free of grease and fumes
Humidity
< 90%
Room temperature
1–35°C
Gas quality
95–99% oxygen purity, drying to -10°C dew point
Working pressure
0–0.4 bar
Physical data
Dimensions
20 × 35 × 25 cm (Width × Depth × Height)
Weight
2.9 kg
Packed size
Consult
Compliance
Manufacturer
ZonoSistem
Origin
Made in Spain
Certificates
CE, BIOCIDE PT2, PT4, PT5, PT11
Warranty
2 years, indefinitely extendable with a maintenance contract
Sold from
2015

Applications

Typical uses

Refrigerated rooms Cold rooms Handling rooms Odour control Disinfection support Modular generator networks Centralised pneumatic lines

Process overview

How it works

When the generator receives a start command, the oxygen inlet electrovalve opens and oxygen enters the unit through the regulated inlet. The gas then passes to the generation core, where corona discharge converts part of the oxygen stream into ozone.

The operator can regulate the desired oxygen flow using the flowmeter and adjust ozone power manually with the potentiometer, allowing the unit to be matched to the application requirement or combined in a centralised multi-generator arrangement.

Included documentation

Documentation pack

Safety manualIncluded
User manual, installation and commissioningIncluded
Maintenance manualIncluded
Declaration of conformityIncluded
Warranty certificateIncluded
Compliance with biocidal regulationIncluded
Quality test resultsIncluded
Included in the packaging2 m power supply cable, 2 m ozone outlet tube and user manual