Contact Us
All Ozone Generators Professional Ozone Generators Ozone Water Injection Systems Electrolytic Ozone Generators Industrial Ozone Generators Commercial Ozone Generators Ozone System Equipment
All Applications Water Treatment Bottled Water & Beverage Wastewater Treatment Agriculture Aquaculture Colour & COD Reduction Cooling Towers Swimming Pools Food Safety Fresh Produce Hygiene Polytunnel Mould Control Cold Room Solutions Ethylene & Pathogen Control Process Water Hygiene Meat, Poultry & Seafood Air & Emissions Control Industrial Odour Control Flue Gas, NOx & VOC Control Need guidance? Ozone Suitability Check Ozone Calculators
Services
Case Studies Blog Ozone Library Technical Glossary Ozone Calculators Ozone Suitability Check
Who We Are
Contact Us
Home / Products / Ozone Generators / Professional Ozone Generators

G40-E Professional Ozone Generator

Professional ozone generator for oxygen-fed operation, designed for reliable ozone production in water treatment, laboratory work and specialist process applications requiring higher ozone capacity and concentration.

  • 40 g/h ozone output on oxygen
  • Also operates at 15 g/h on dry air
  • Manual power control with oxygen flow regulation
  • Works from oxygen bottle or PSA concentrator
Request a Quote
G40-E Professional Ozone Generator

Technical Summary

System
Generator model
G40-E
System configuration
Professional standalone ozone generator for bottled oxygen or PSA-fed operation
Generation technology
Air-cooled 40 g O₃/h module with borosilicate dielectric and high frequency corona discharge
Control system
Manual START and GENERATE switches, with manual ozone power control by potentiometer
Indicators and sensors
Power indicator light, ozone amp consumption indicator, ozone amps and oxygen pressure monitoring
Performance
Ozone production
40 g O₃/h on oxygen, 15 g O₃/h on dry air
Ozone concentration
90 g O₃/Nm³ on oxygen, 5 g O₃/Nm³ on dry air
Gas flow
7.5 L/min on oxygen, 50 L/min on dry air
Gas connection IN/OUT
Tube 8 mm outside diameter
Flow regulation
Oxygen flowmeter with manual regulation
Utilities
Power supply
230 V, 50–60 Hz
Electric power
400 W
Compressed gas unit
Oxygen inlet pressure reducer, inlet electrovalve, outlet electrovalve and oxygen flowmeter
Source gas
Bottled oxygen or PSA oxygen concentrator
Installation
Ready to plug and play
Operating conditions
Room fittings
Place in a clean and dry space, free of grease and smoke
Humidity
< 90%
Room temperature
5–35°C
Gas quality
95–99% oxygen purity, dried to -10°C dew point
Working pressure
0–0.4 bar
Physical data
Dimensions
120 × 40 × 80 cm (Length × Width × Height)
Weight
50 kg
Packed size
120 × 50 × 80 cm (Length × Width × Height)
Compliance
Manufacturer
ZonoSistem
Origin
Made in Spain
Certificates
CE, BIOCIDE PT2, PT4, PT5, PT11
Warranty
2 years, indefinitely extendable with a maintenance contract
Sold from
2015

Applications

Typical uses

Aquariums Fish farms Protein skimmers Venturi aspiration Laboratory ozone treatment Water atomising systems Small process water duties

Process overview

How it works

When the unit receives a start command, the oxygen inlet electrovalve opens and oxygen enters the system through the regulated inlet. The oxygen is then directed to the generation core, where corona discharge converts part of the oxygen stream into ozone.

The operator can regulate the gas flow using the oxygen flowmeter and adjust ozone production manually through the power control potentiometer, allowing the generator to be matched to the application requirement.

Included documentation

Documentation pack

Safety manualIncluded
User manual, installation and commissioningIncluded
Maintenance manualIncluded
Declaration of conformityIncluded
Warranty certificateIncluded
Compliance with biocidal regulationIncluded
Quality test resultsIncluded
Included in the packaging4 m of 8 mm Teflon tube, power cable and user manual