Continuous Operation

  • Highly efficient selective UV-C lamp (at 253.7 nm), pure quartz.
  • Stainless steel AISI 304 body.
  • All used materials are tested to resist to intense UV-C radiation
  • Specific electronic ballast for UV-C rays lamps.
  • Protected against dust and water (IP55).
  • Pure bright mirror aluminum reflector.
  • CE trademark (LVD 73/23 – EMC 89/336 – MD 93/42).
  • Complies with the noise standards of Directive 2006/42/EC
  • Values measured according to UNI EN ISO 3746
  • Non-detectable and non-transmissible vibration values
  • Suitable for class 1 installations – protected areas


UV Cold Room Disinfection

UV-REFLEX is a high output UV-C ultraviolet germicidal device specifically designed for cold rooms and food processing areas.

The UV-REFLEX performs a progressive action of decontamination from airborne bacteria and mould present in the air of the cold rooms, improving the conditions of preservation of products. It works by treating the air with a constant high dosage of UVC light of 253.7 nanometres wavelength. As only the air is treated, it does not alter the organoleptic features of food and its quality, but rather, it prevents product loss due to the proliferation of bacteria and fungi and enhances the freshness, taste and appearance of food, without dehydration and weight loss.


Germicidal Ultraviolet irradiation has a proven, strong germicidal effect against micro-organisms (moulds, bacteria and viruses). The device does not affect the normal ageing of the product, as it works to minimize the growth of unwanted microorganisms, i.e. those found in the air. UV-REFLEX achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation. The concept and the effectiveness of it have been well documented by ASHRAE and others.

Traditional cleaning/filtration methods

Traditional cleaning methods and facility air filtration alone is often not sufficient to ensure high levels of hygiene. UVC technology is a simple and cost-effective solution that can enhance facility hygiene, comfort and workplace sanitation regimes. The best part is there are no chemicals involved, providing a healthier environment for all.

Operation of UV-REFLEX

UV-REFLEX can be safely operated 24/7 without contraindications. The treatment takes place by exploiting the constantly forced air circulation, (due to the flow generated by the fan of the ventilation system), which pass next to the device and is decontaminated from microbes before they enter into contact with the products inside the cold rooms.

Owing to the use of the UV Cold Room technology, it is possible to increase the shelf life of food preserved in cold rooms, without developing resistant microorganisms and without the use of chemicals, risky to employ and hard to biodegrade.

No Ozone

The use of UVC light in the 253.7 nanometres wavelength means there is no ozone produced. This is particularly important as ozone is hazardous to humans.


UV-REFLEX is a versatile Air Germicidal Device that is cost-effective, simple to install and operate. Applications include:

  • Abattoirs
  • Smallgoods factory
  • Food processing centres
  • Cool rooms

UV-REFLEX includes:

  • UV-REFLEX-SCB is a wall-mounted germicidal device with indirect radiation upwards, with structure in AISI 304 stainless steel, specifically conceived for cold rooms. The inner surface consists of a mirror bright aluminium reflector to increase the reflection of UV rays. Directional black honeycomb filter channels the flow of UV-C rays.
  • The series includes a wide range of models, different according to the UV-C lamp wattages.
  • UV-REFLEX-SCB is provided with a 2.5 m power cable without a plug.
  • UV-REFLEX-SCB can be equipped with a special control board for operational control, which, especially in the case of installation of several units, can handle switching on, failure alarms, meters and input security check in the room treated.
  • The treatment is immediate and ready to use, maintenance is minimal and mainly concerns the periodic replacement of the UV-C lamp.
  • UV-REFLEX-SCB is entirely manufactured in Italy, with high quality and extremely resistant materials.

Request Information

Contact us to get information about our solutions, application details and price information.